Updated November 2026

Jabra headphone ear pads replacement is a simple job that can bring back the comfort and seal your headset had when it was new. In most cases you only need to match the right pad type, release the old ones, and press the new pads into place. The whole process usually takes less than ten minutes.

Check Your Model and Pad Type Before You Buy

Jabra uses different pad designs across its over-ear and on-ear lines, and the attachment method varies. Look up your exact model number, which is usually printed inside the headband or on the box. Then confirm whether the pads are sold as a pair with a specific model code, since some pads look alike but do not fit interchangeably. Protein leather pads tend to feel softer on the skin, while velour pads breathe better in warm rooms. The guide on Ear Pad Materials and Headphone Styles Compared covers these trade-offs in more detail.

Shopping for one? See our guide: 3 Best Spare Headphone Ear Pads for Bose QC35 Owners (2026).

Remove the Old Ear Pads

Most Jabra ear cushions clip or press onto the earcup frame rather than being glued. Work slowly and avoid prying with metal tools, which can crack the plastic.

  1. Set the headset on a soft surface and rest the earcup face down.
  2. Starting at one edge, gently pull the pad outward until the retaining tabs release.
  3. Work your way around the perimeter so the pad lifts evenly.
  4. Check the earcup frame for dried adhesive or debris before fitting the new pad.

Fit the New Ear Pads Correctly

Align the new pad so the tabs or grooves line up with the earcup frame before pressing. Start by seating one edge, then push around the rest of the rim with even pressure. You should hear or feel each tab click into place. Do not force a pad that resists; a mismatch in alignment usually means the pad is the wrong size or the wrong orientation.

Test the Seal

Put the headset on and listen to music with bass. If you hear a loud thump of air leaking, the pad may not be fully seated. Adjust the headband once the pads are in place so the earcups sit evenly over your ears.

Replacement Checklist

  • Exact Jabra model number
  • Replacement pads matched to that model
  • Soft cloth for cleaning the earcup frame
  • Clean, flat workspace

Common Mistakes

  • Buying pads by appearance alone instead of by model code.
  • Using metal tools that scratch or crack the earcup frame.
  • Skipping the frame cleaning, which leaves debris that prevents a tight fit.
  • Pressing one side hard while leaving the other side loose.
  • Ignoring a worn headband, which can make even new pads feel uneven.
  • Replacement pads matched to your Jabra model. Using the correct model code is the single most important step for a secure fit. View on Amazon
  • Microfiber cloth. It wipes dust from the earcup frame without leaving lint behind. View on Amazon

FAQ

Can I use pads from a different Jabra model?

Sometimes, but only if the shape, diameter and attachment design match exactly. Check the model compatibility notes from the seller before ordering.

How often should I replace Jabra ear pads?

Replace them when the foam flattens, the leatherette cracks or peels, or the seal no longer blocks sound. Frequent daily use usually wears pads out sooner than occasional listening.

Do I need special tools?

No. Most replacements can be done by hand. A soft cloth and a clean surface are all you need.

Conclusion

Matching the right model, removing the old pads gently and checking the seal will restore your headset’s comfort. Take your time with the alignment step and the job goes quickly. If a pad still feels loose after fitting, contact Jabra support for guidance on your specific model.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our headphone comfort & accessories + gaming headsets guides, checking product details against manufacturer specifications and owner feedback.