Updated November 2026

A headphone stand from Five Below can keep your headphones off the desk, untangled and within reach, as long as you pick the right size and check a few build details before you buy. This guide walks through what to look for in a headphone stand five below shoppers often find in the accessories aisle, how to test it at home, and how to set it up so it stays stable.

Step 1: Measure Your Headphones and Desk Space

Start with your headphones, not the store shelf. Measure the width of the headband when it is adjusted to your normal setting, and note the depth of the earcups. Many over-ear models need a base that is at least a few inches wider than the headband so the arms do not pinch the cups when you lift them off. Then measure the open desk area next to your monitor or keyboard. A stand with a footprint of about 3 to 4 inches square fits most corners without crowding your mouse.

Shopping for one? See our guide: 5 Best 3D Printer Headphone Stands for Desk Setups (2026).

Step 2: Check the Base and Stability

The base decides whether the stand tips when you hang a heavy gaming headset on it. Look for a wide, flat base with a non-slip rubber or silicone pad on the underside. Lightweight plastic bases are fine for in-ear buds and small headphones, but for larger headsets, tilt the stand gently. If it rocks or lifts on one side, it will likely fall over once a headset is hung.

Step 3: Confirm the Cradle Fits Your Headband

Most budget stands use a single rounded or V-shaped cradle. Check that the curve is wide enough to hold the headband without forcing the arms outward. Padded or silicone-lined cradles protect leather and faux-leather headbands from scuffing. If you own a headset with a thick, padded band, a cradle with a wider contact area will spread the weight and reduce pressure marks over time.

Step 4: Plan Cable Management

A stand that holds the headphones but leaves the cable dangling on the desk defeats the purpose. Look for a stand with a hook, groove or cable clip on the back or base. If none is included, a small adhesive cable clip placed under the desk edge does the same job. Route the cable so it hangs freely with a slight loop, so it does not pull the stand when you stand up or reach across.

Setup Checklist

  1. Measure your headband width and earcup depth.
  2. Confirm the desk area is at least 3 to 4 inches square.
  3. Test the base for wobble on a flat surface.
  4. Check that the cradle curve matches your headband shape.
  5. Choose a hook or clip for the cable.
  6. Place the stand away from desk edges and drink spills.

Common Mistakes to Avoid

  • Buying a stand that is too narrow for over-ear headphones, which causes the arms to bend.
  • Skipping the wobble test on a hard surface before hanging a heavy headset.
  • Leaving the cable loose, so it tugs the stand every time you move.
  • Hanging headphones by the earcups instead of the headband, which can stretch the arms.
  • Placing the stand on a soft mouse pad, where the base may not sit flat.

A small adhesive cable clip keeps the cord from pulling the stand off balance, and it costs very little to add.
View on Amazon

A silicone desk pad or anti-slip mat under the base prevents sliding and protects the desk surface.
View on Amazon

FAQ

Will a headphone stand from Five Below fit gaming headsets?

It depends on the headband width and the stand’s cradle size. Measure your headset before buying, and check that the cradle is wide enough to hold the band without bending the arms.

How do I keep a lightweight stand from tipping?

Place it on a flat, hard surface and add a non-slip pad under the base. Avoid hanging heavy headsets off the edge of the stand, since the weight shifts forward.

Can I use a headphone stand with a wireless headset?

Yes, as long as the cradle fits the headband. Wireless headsets often have the same shape as wired models, so the same measuring and stability checks apply.

Conclusion

Measure your headphones, test the base for stability, and plan the cable before you commit to any stand. A little attention to these details means the stand will hold your headset securely for years. Check the product listing for exact dimensions before purchase.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our headphone comfort & accessories + gaming headsets guides, checking product details against manufacturer specifications and owner feedback.