Updated November 2026
AKG headphone ear pads wear out over time, and when they do, comfort and sound both suffer. This guide explains how to identify the right replacement, what to check before buying, and how to swap the pads without damaging the earcups. Most owners can complete the job in under 15 minutes with basic tools.
Step 1: Identify Your AKG Model and Pad Type
AKG makes both over-ear and on-ear designs, and the pads are not interchangeable between them. Look for the model name printed on the inside of the headband or earcup. Pads are usually sold as a set for a specific model, so confirm the exact name before ordering.
Shopping for one? See our guide: 3 Best Spare Headphone Ear Pads for Bose QC35 Owners (2026).
Also note the pad style. Most AKG over-ear models use a round or oval pad that snaps or slides onto a plastic earcup frame. Some pads are attached with clips, while others use a friction fit. Photograph the back of the earcup before you remove anything so you can match the orientation later.
Step 2: Choose Between Leatherette, Velour and Foam
Replacement pads generally come in three materials, and each affects comfort and isolation differently:
- Leatherette (protein or synthetic leather): Good seal and passive noise isolation, but can feel warm during long sessions.
- Velour or fabric: Breathable and softer against the skin, with slightly less isolation and a more open sound.
- Memory foam cores: Conform to the head well and tend to hold their shape, often paired with a leatherette or velour cover.
If you wear glasses or sweat easily, velour or a breathable foam option is usually more comfortable. If you listen in noisy places, a leatherette seal tends to block more outside sound.
Step 3: Remove the Old Pads Without Breaking Clips
Work slowly, because the plastic retaining rings on AKG earcups can crack if pried too hard. Follow these steps:
- Place the headphones on a soft cloth to protect the drivers and finish.
- Grip the old pad at its edge and pull straight outward. If it resists, gently work a thin plastic spudger or guitar pick around the rim.
- Do not bend the earcup frame or pull on the cable.
- Check the foam or adhesive residue on the frame and wipe it with a dry cloth.
Step 4: Install the New Pads and Check the Fit
Align the new pad with the photo you took earlier. Press the pad evenly around the full circumference until it seats flat against the frame. A slight click or firm resistance usually means it is locked in place.
Once installed, put the headphones on and check the seal. You should feel light, even pressure without gaps. If one side sits higher, remove and reseat it. Avoid stretching the pad over the frame, since that can cause it to pull loose within days.
Common Mistakes and Tips
- Ordering pads by the headphone family name alone, instead of the exact model number.
- Forcing a pad onto the frame with bent or uneven pressure.
- Skipping the photo before removal, which makes reinstalling harder.
- Using solvent cleaners on leatherette, which can dry and crack the surface.
- Replacing only one pad when both have aged, which can leave the sound unbalanced.
Recommended Gear
A plastic spudger or nylon pry tool lets you lift old pads without scratching the earcup. Search for plastic trim removal tool kit View on Amazon.
A soft microfiber cloth protects the drivers and finish during the swap and helps remove adhesive residue. Search for microfiber cleaning cloth View on Amazon.
For keeping pads clean between replacements, a mild, alcohol-free cleaning wipe suits leatherette surfaces. Search for leather cleaning wipes View on Amazon.
FAQ
Can I use pads from a different AKG model?
Sometimes, but only if the diameter, mounting style and depth match exactly. Compare measurements with the old pads before trying a swap, since mismatched pads often fail to seat properly.
How often should AKG ear pads be replaced?
There is no fixed schedule, since wear depends on use, climate and skin oil. Replace them when the foam flattens, the cover cracks or peels, or the seal feels noticeably looser.
Will new pads change the sound?
Yes, because the pad material and seal affect bass response and isolation. Leatherette usually boosts bass and blocks more outside noise, while velour tends to sound more open.
Conclusion
Matching the exact AKG model, choosing a pad material that suits your listening habits, and installing carefully will restore comfort and seal. Take your time during removal and check the fit before the first long session. If a pad seems damaged or the earcup frame is cracked, consult the manufacturer or a qualified repair service.
